The side marker cameras for the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 5" Screen Item # FCE48TASL-05 are usually installed on the rear side markers and not on the front ones. If you still want to install them in the front you can drill a hole above the compartment door and run the wires from the camera down and tie them into the existing side marker lights to avoid any space issues and you'll just have an extra side marker light.
I've attached... view full answer...
The TireMinder i10 TPMS # TM29FR will not work with the display on your 2010 Dodge Ram 2500. The Tireminder system is a far superior system to the one that is already installed on your Ram. It will check both the tire pressure and temperature every 6 seconds, where the truck sensors can take up to 20 minutes before it recognizes the tire pressure only. You can use the TireMinder sensors on your truck and have everything on one display for all of your tires.
You can purchase additional... view full answer...
To replace the standard vent lid on your Keystone travel trailer use one of the following from MaxxAir, depending on the color you want:
- White: MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent # MA00-335001
- Smoke: MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent # MA00-335002 view full answer...
No, you will need a Dometic replacement roller tube for your Dometic awning - a Lippert roller tube will not work as a replacement.
If your awning is damaged and you're considering replacing it entirely I recommend checking out the 20' Long Solera Smart Arm 12V Power RV Awning # LC517517 which is an upgrade to standard awnings by including nice features like the auto rain dump feature so you don't have to worry about rain pooling on top of the awning.
Attached is a review video for you... view full answer...
The mounting bracket has an inner tube diameter of 2"and an outer tube diameter of 2-1/4". I recommend the Bulldog Round, Pipe-Mount Swivel Jack - Topwind - 10" Lift - 5,000 lbs item # BD178101. This will mount directly to that short section of tubing you were referring to and not to the actual frame of your trailer. view full answer...
As long as the 26 inch length of the leaf spring part # e27SR matches what you have now this spring would work great. The difference in the amount of leaves would not be an issue at all. Most likely you have 2-3/8 inch diameter axles and the correct U-bolt kit would be the part # APUBR-1 but if you have something different let me know. view full answer...
Go To Results